Philips Cordless telephone SE4502B - Manual (Page 48)

46 Advanced settings
By default, the PIN is 0000.
1
On the base station, press and hold
a for 3 seconds.
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
2
On the handset, press
m, scroll n
to Advanced Set and press
o
Select.
3
Scroll
n to Register and press o
Select.
4
Enter the PIN when prompted and
press
o OK to confirm.
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
10.6.1 Easy registration
1
Insert the unregistered handset in
the base station to automatically
begin registration.
2
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
The easy registration is possible only
when PIN has not been changed and is
still the default PIN 0000.
10.7 Unregister
1
Press
m in idle mode, scroll n to
Advanced Set and press
o
Select.
2
Scroll
n to Unregister and press
o Select.
3
Enter the PIN when prompted and
press
o OK to confirm.
4
Scroll
n to select the handset
number to unregister and press
o
Select. Press
o OK to confirm.
• A validation tone is emitted to
indicate successful unregistration.
A registered handset other than one of
the model described in this manual can
only be unregistered using a handset
described in this manual.
10.8 Reset Unit
You can reset your phone to its default
settings with this feature. (see 10.14
“Default Settings”)
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
You may have to configure your phone
once again.
Note
Note
Note
Note
Caution
Note