5 chain dialing, 6 using your phonebook, Chain dialing – Philips Cordless telephone SE4502B User Manual
Page 33: Using your phonebook, Store a contact in the phonebook, Access phonebook
31
Use more of your phone
very high level. Make sure the handset is
not too close to your ear.
1
During a call, press
l to activate
the loudspeaker mode.
2
Press
l again to return to
deactivate the loudspeaker mode.
8.5
Chain dialing
This feature allows you to dial an
extension to a number already saved in
the phonebook during a call.
1
Press
t or l on the handset to
take the line. Then, press
o
Option and then
o Select to
enter the phonebook name list.
2
Scroll
n to a phonebook entry.
3
Press
o Select.
• The first part is dialed.
4
Enter the extension.
8.6
Using your Phonebook
Your phone can store up to 100
phonebook memories. Each phonebook
entry can have a maximum of 24 digits
for the phone number and 14 characters
for the name.
All names and numbers in the
phonebook must be unique.
If you have more than one handset, the
phonebook can only be accessed by one
user at a time.
8.6.1 Store a contact in the
phonebook
1
Press
m in idle mode.
Phonebook is highlighted; press
o Select.
2
New Entry is highlighted; press
o Select.
3
Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press
o OK.
4
Enter Number is displayed. Enter
the number (maximum 24 digits)
and press
o OK.
• A validation tone is emitted.
• Press
c Clear to delete the last
digit or character entered or long
press to delete all.
• To return to the previous menu, press
c Back.
You cannot store a new phonebook
entry when the memory is full. In this
case, you have to delete existing entries
to make space for new entries.
8.6.2 Access phonebook
1
Press
d in idle mode and scroll
n to browse the phonebook. (You
can also access the phonebook
through the menu mode.
m ➝
Phonebook
➝ List)
• The phonebook entries will be
listed in alphabetical order.
2
To view the details, press
o
View.
Note
Note
Tip