Installation / circuit loading – Philips 10000032 User Manual
Page 20
INSTALLATION / CIRCUIT LOADING
The machine is warming
up; lights are fl ashing.
Note: You must load the circuit before starting up the
machine for the fi rst time, if it has been inoperative for a
lengthy period or if the water tank has been completely
emptied.
The circuit must be also loaded each time
the light is steadily lit:
Turn the knob countercloc-
kwise to start loading the
circuit.
Turn the knob clockwise
to terminate the circuit-
loading process.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch
to “I” to turn on the
machine.
Fill the coffee bean container
with coffee beans.
Check that all components
are correctly placed.
Insert the plug into a sui-
table electric socket.
Place a container beneath
the steam tube.
Wait until a steady stream
of water fl ows out from the
nozzle.
Remove the container.
See rating plate
When lights remain steadily
lit, the machine is ready
for use.
Check the dater on “Aqua Prima” fi lter; if fi lter is past its
date, replace it with a new one.
The “Aqua Prima” fi lter can
be installed (see pg.27).
20
The messages displayed by the machine during operation are shown
on pg.28.
Important warning for using the “Aqua Prima Filter” can be found at
page 28.