Braun NUVL855RM24 - Manual (Page 30)

Page 28
Lift Operating Instructions
OPEN DOOR(S) AND SECURE
TO DEPLOY PLATFORM:
1. Stand clear and press the UP switch until the
platform extends fully. Release switch.
2. Lift handrail latch handles, deploy (lift) handrails
up to vertical position and lower handrail latch
handles fully.
3. Lift outer barrier to vertical position.
4. Latch handrail belt.
5. Press the UP switch until the platform stops
(raises to floor level) and inner roll stop unfolds to
floor level. Release switch.
TO UNLOAD PASSENGER:
1. Read Note below! Load passenger onto plat-
form and lock wheelchair brakes.
Note: Passenger must be positioned fully inside
yellow boundaries, outer barrier must be UP
and handrail belt must be latched.
2. Press DOWN switch until the entire platform
reaches ground level and the outer barrier un-
folds fully (ramp position). Release switch.
3. Unlatch handrail belt, unlock wheelchair brakes
and unload passenger from platform.
Note: Outer barrier must be fully unfolded
(ramp position) until the entire wheelchair (or
standee) has crossed the outer barrier.