Philips 27PT6341-07 - Manual (Page 26)

26
BLOCK CHANNELS
1
-
Press the CURSOR < or > until the words
BLOCK CHANNELS are highlighted.
2
Press CURSOR > to turn blocking ON or OFF
for that channel. When ON is selected the channel
will be blocked.
3
Press CH+ or CH- to select other channels
you wish to block. Repeat step 2 to block the
new channel.
4
To Unblock a channel, use the CH+ or CH-
to scroll to the channel you wish to unblock. The
screen will show a message telling you that the
channel has been blocked by AutoLock and you have
to Enter your Access Code to unblock the channel.
5
Use the NUMBERED Buttons, key in your Access
Code. The Blocked channel will be unBlocked.
6
When finished, press the STATUS / EXIT button
on the remote control to remove the menu from
the screen.
NOTE : If you forget your code, key 0 7 1 1. This is the
factory default. Enter this code to create a new access
code.
A A
fter your personal access code has been sent (see previous page), you are ready to select the channels or the A/V
inputs you want to block out or censor. Once you’ve entered your access code and the AutoLock features are
displayed on the screen :
AutoLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating Off Stop Time
Channel
Activate
Display
Channel 12
Blocked By AutoLock
Channel Blocking
Access Code
- - - -
Block Channel On
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
VOL
>
>
< >
MENU STATUS / EXIT
CH+ / -