Philips 42PF9936D-37B - Manual (Page 12)

8
Devices with Progressive scan output (e.g. a digital Set Top box, a video game console or
Progressive scan DVD player (480p, 576p, 720p or 1080i)
Connect the device with 2Fh YPbPr output to the VGA
connector 1 (with the supplied adapter cable VGA to
cinch) and to the
L and R AUDIO jacks 2 of AV3 .
See also the manual of your High Definition device.
Note: This television is designed to accept high definition signal
standards 480p, 576p, 720p and 1080i as specified by the
Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of
differing output standards which may cause difficulties for the
television to properly display.
Warning: In case you notice scrolling images, wrong colors or no
colour, no picture, or even combinations of these on your screen,
check if the connections are done in the correct way or move
your digital device further away from your TV.
AV3
L
AUDIO
R HDMI
VGA
Y/Pb/Pr (2Fh)
1
DVD
2
Connect your computer
1
2
HDMI
AV3
L
UADIO
R
VGA
Y/Pb/Pr (2Fh)
You may connect your computer to the VGA connector of
AV3 or to the HDMI connector (see further).
& Connect one end of a VGA cable 1 to the video card
of the computer and the other end to the
VGA Y/Pb/Pr
2Fh 1 connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
é In case of a Multimedia computer, connect the audio
cable 2 to the audio outputs of your Multimedia
computer and to the
AUDIO R (right) and L (left)
inputs.
The VGA connector allows the following TV and
monitor display modes:
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz (30PF9946 only)
Note:
If possible, use the XGA1024x768@60Hz video mode to
obtain the best image quality for your 30PF9946 LCD
monitor.
2355.4 en 02-11-2004 14:19 Pagina 8