Recorder, Recorder and other a/v devices – Philips 42PF9936D-37B User Manual
Page 11
7
Recorder (
VCR
-
DVD
+
RW
)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 20” from the screen.
Recorder and other A/V devices
AV2
MON.OUT
VIDEO/AUDIO
VIDEO/AUDIO
S-VIDEO
R
x ANTENNA
CABLE
RECORDER
IN
OUT
4
3
AV2
MON.OUT
VIDEO/AUDIO
VIDEO/AUDIO
x ANTENNA
S-VIDEO
R
RECORDER
CABLE
3
4
OUT
IN
x
TV
&
Connect the RF Antenna or Cable TV cable 1
(eventually via an optional two-way signal splitter and/or
Cable TV convertor box) to the
RF IN
socket of your
recorder.
é
Connect another RF cable 2 from the output
OUT
of
your recorder to the TV’s input x
ANTENNA
jack.
“
Connect the supplied adapter cable mini-jack to cinch
3 to the
VIDEO/AUDIO
input jack of
AV2
.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
4 with the
S-VIDEO
input.
S-VHS does not provide audio, so the mini-jack to cinch
cable must still be connected to provide sound.
&
Connect the RF Antenna or Cable TV cable 1 to the
RF IN
socket of your other A/V device.
é
Connect the supplied adapter cable mini-jack to cinch
2 to the
VIDEO/AUDIO
input jack of
AV2
.
“
Connect the RF output of the A/V device to the RF
input on the recorder 3.
‘
Connect another RF cable 4 from the output
OUT
of
your recorder to the TV’s input x
ANTENNA
jack.
If your recorder has an S-VHS video jack: see above.
Devices with Component Video Output Connectors (YPbPr)
&
Connect the three separate component video cables 1 to the
device having component video outputs (YPbPr), such as DVD-
players, laser-disc players, videogame players, satellite receivers, or
other equipment and to the
Y
,
Pb
and
Pr
jacks of
AV1
on the TV.
é
Connect the audio cable 2 to the device’s
AUDIO L
and
R
jacks
and to the
L
and
R
audio
YPbPr
jacks of
AV1
.
“
For reproduction of CVI (Component Video Input) also connect to
the
CVBS
jack of
AV1
. See the handbook of your DVD player.
Note: the labels for the component video sockets may differ depending on
the DVD player or the device connected. Although the abbreviations may
vary the letters B and R stand for blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD
player’s or device’s instructions for use for definitions and connection
details.
AV1
(1Fh)
Pr
AUDIO
Pb
Y
R
L
CVBS
VIDEO
L / Mono
AUDIO
1
VIDEO
L/
Mo
no
AUDIO
DVD
2
The
MON. OUT
connector can be used for a daisy
chaining or to record programs from your TV. Only when
a recorder is connected to
MON. OUT
it is possible to
record a program from other devices connected to the
TV.
See Record with your recorder, p. 15.
2355.4 en 02-11-2004 14:19 Pagina 7