Philips VRX362AT99 - Manual (Page 30)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
1
Start a recording (see page 29).
30 Recording One Channel/Watching Another
• If your remote control operates your
TV, press the TV button, then use
the CHANNEL (Up/Down) buttons
on the remote control to select TV
channels. See page 20 for details.
• If you use a Cable Box or Satellite
System hookup, you may not be
able to watch one channel while
recording another. See pages eight-
nine for details.
• If you don’t receive channels, check
your hookups, then follow the
instructions above carefully.
Helpful Hints
3
Press the VCR/TV button to put the VCR in TV position. The
VCR light will disappear from the VCR’s display panel.
4
Press the TV button, then press the CHANNEL
(Up/Down) or Number buttons to choose the channel you
want to watch. Or, use the TV remote control to select the chan-
nel you want to watch.
5
To return to the channel being recorded, press the TV button,
then use the Number buttons to select channel 03 or 04
(whichever channel the CH3/CH4 switch on the back of the VCR
is set to).
Or, if the VCR remote control doesn’t operate your TV, use the
TV remote control to select channel 3 or 4.
1
3
4
6
Press the VCR button.
7
Press the VCR/TV button to put the VCR in VCR position.
The channel being recorded will appear on-screen.
5
2
&
6
7
2
Press the VCR button.
8
Press the STOP button to stop the recording.
8