Philips VRX362AT99 - Manual (Page 13)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
Channel Memory (cont’d) 13
Adding/Deleting Channels
2
Press the MENU button to bring up the main menu display.
SELECT CHANNEL NUMBER
CH – –
TO END PUSH EXIT
3
Press the Number 3 button to select TUNER SET UP.
4
Press the Number 4 button to select ADD/DELETE CH.
5
Use the Number buttons to enter the channel number.
TO SELECT PUSH NUMBER
CH12
1 ADD
2 DELETE
3 SELECT ANOTHER CH
TO END PUSH EXIT
6
Press the Number 1 button to add that channel or the
Number 2 button to delete that channel. Or, press the
Number 3 button to leave that channel unchanged and select
another channel. If you do not make a choice within five seconds,
you will return to the previous menu display.
7
Press the STATUS/EXIT button to exit.
Reviewing Programmed Channels
1. Press the VCR button.
2. Press the MENU button to bring up the main menu display.
3. Press the Number 3 button to select TUNER SET UP.
4. Press the Number 5 button to select CH MEMORY REVIEW. A list of programmed channels will appear
on-screen.
• If all the programmed channels don’t fit on the screen, press the Number 1 button to see the remain-
ing channels. Then press the Number 2 button to return to the first screen of channels.
• If you do not press any buttons within 10 seconds, you will either go to the next screen of channels or
return to the previous menu display.
5. Press the STATUS/EXIT button twice to exit.
2
3
4
6
7
5
1
Press the VCR button.
1