Philips Soundbar speaker HTL5110 Virtual surround Wireless subwoofer Opt Coax Aux in Audio in Bluetooth® - Manual (Page 13)

12 EN
6 Product
specifications
Note
• Specifications and design are subject to change without
notice.
Amplifier
• FTC total output power: 62W
• Left + Right: 24W (1%THD, 8ohm,
300Hz-20kHz)
• Subwoofer: 38W (1%THD, 4ohm,
30Hz-70Hz)
• RMS total output power: 120W RMS (+/-
0.5 dB, 30% THD) / 96W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 650 mV
• AUDIO IN: 400 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32
• Supports MP3 and WMA file formats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
Bluetooth
• Bluetooth profiles: A2DP, AVRCP
• Bluetooth version: 3.0 + EDR
Main unit
• Power supply: 110-127 V~, 60 Hz
• Power consumption: 20 W
• Standby power consumption: ≤ 0.5 W
• Speaker impedance: 8 ohm
• Speaker drivers: 2 x 3" woofer + 2 x 1"
tweeter
• Dimensions (WxHxD):
995 x 94 x 102.5 mm
• Weight: 3.1 kg
Subwoofer
• Power supply: 110-127 V~, 60 Hz
• Power consumption: 20 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 165 mm (6.5") woofer
• Dimensions (WxHxD):
190 x 250 x 310 mm
• Weight: 3.8 kg
Remote control batteries
• 2 x AAA-R03-1.5 V
HTL5110_F7_UM_V1.0.indb 12 2013/3/15 17:00:07