4 use your soundbar, Adjust the volume, Choose your sound – Philips Soundbar speaker HTL5110 Virtual surround Wireless subwoofer Opt Coax Aux in Audio in Bluetooth® User Manual
Page 10: Mp3 player
9
English
EN
4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the SoundBar to the correct source
for other devices.
Adjust the volume
To increase or decrease volume, press +/-
(Volume).
• The Source indicators on the front panel
blink once when the volume is set to
either minimum or maximum.
To mute sound, press (Mute).
• The current Source indicator on the front
panel blinks continuously.
To restore the sound, press (Mute) again or
press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press SURR repeatedly to select surround
mode or stereo mode.
»
When surround mode is on, the
SURR indicator on the main unit
lights up. Creates a surround listening
experience.
»
When the SURR indicator on the
main unit turns off, two-channel stereo
sound is on, ideal for listening to music.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
»
The current source indicator blinks
once every time you press TREBLE +/-
or BASS +/-.
»
All the source indicators blinks once
simultaneously when treble or bass
is set to the maximum or minimum
value.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1
Press NIGHT MODE to turn night mode
on or off.
»
When night mode is turned on, the
SURR indicator blinks once.
»
When night mode is turned off, the
SURR indicator blinks twice.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2
Press AUDIO IN on the remote control.
HTL5110_F7_UM_V1.0.indb 9
2013/3/15 17:00:06