Philips CDR950BK - Manual (Page 18)

English
18
This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.
Important:
- Recording from CD-changers should always be started in
the RECORD DISC, RECORD TRACK or MAKE CD mode.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press Source repeatedly until (depending on the connection
used):
➜ DIGITAL I d, DIGITAL I I d, OPTICAL I p or ANALOG
a lights up and
DIGITAL 1, DIGITAL 2,
OPTICAL or ANALOG will appear on the display.
3 With the CD recorder stopped, press REC TYPE
once: to select ' RECORD DISC';
twice: to select '
RECORD TRACK';
four times: to select ‘ MAKE CD'.
➜ d and
SYNC start to flash and the display shows the
selection.
• If
CHECK INPUT message also flashes, the digital
connection is incorrect.
Start recording
1 To start recording, press Play on the selected source.
➜ The CD recorder automatically starts to record and d
lights continuously.
• If, however, you start the source during a track, recording
will start at the beginning of the next track or after 2.7
seconds of silence in analog recordings.
• To check the elapsed recording time, press DISPLAY.
(This can also be done during recording.)
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜ WAIT lights up and
SYNC and d go out.
• If STOP 9 is pressed within 3 seconds after pressing PLAY,
no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
➜ d starts to flash. To resume, press RECORD on the CD
recorder.
After recording the display will show
UPDATE for several
seconds.
Note: Recordings from DAT, DCC or analog sources will only
stop after 20 seconds of silence.
Important:
If you want to play the recorded CDR disc on a regular
CD player, it must be finalized. See finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
DIGITAL
OPTICAL
ANALOG
I I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
DIGITAL
OPTICAL
ANALOG
I I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
RECORD
Autostart recording
RECORDING