Philips 741453007 - Manual (Page 37)

37
Programming - Legal information
displayed in turn:
q u a n t i t y w a t e r
n o t r e a c h e d
and,
for example,
l e f t q u a n t i t y
l 1 3 0
.
• Again press the “MENU/OK” key. The
message
r e s e t d e s c a l i n g
y e s
will be
displayed. By pressing the “MENU/OK”
key again, you will clear the meter.
Note: if you do not wish to clear
the meter, press “ESC”.
Important: it is recommended to
clear the scale meter each time
after descaling so that you will not
forget to descale the machine.
TIMER
It is possible to program the machine to switch
over automatically from the
r e a d y f o r u s e function to the
E N E R G Y S A V I N G after a certain time has
lapsed. It is initially set at 0 hours but may
be adjusted from 0 to 12 hours, with 15-
minute intervals.
The timer goes back to zero after every
dispensing operation.
The setting of “0:00” means that the timer if
off.
• Press the “MENU/OK” key. Use the ∧∧∧∧∧
or ∨∨∨∨∨ key to select the t i m e r
function and activate it with the “MENU/
OK” key. The indication
s t a n d b y
a f t e r : 0 : 0 0
will be displayed.
• Use the ∧∧∧∧∧ or ∨∨∨∨∨ key to select the time
desired and memorize it by pressing the
“MENU/OK” key.
CLEANING CYCLE
This function allows you to execute a
cleaning cycle in which all the coffee-
dispensing parts are cleaned with water.
During the cleaning cycle it is advisable
for someone to be present to supervise
the operation.
• To start the cleaning cycle press the
“MENU/OK” key and use the ∧∧∧∧∧ or ∨∨∨∨∨
key to select the
r i n s i n g c y c l e
function; press the “MENU/OK” key to
access the function. Press the “MENU/
OK” key again to start the cleaning cycle.
• When the cleaning cycle has been
completed, the message
f i l l w a t e r t a n k
appears on the
display. At this point, fill the water
container and the machine will
automatically return to the normal
operating status.
s e l e c t p r o d u c t
r e a d y f o r u s e
will
appear on the display.
11 LEGAL INFORMATION
•These instructions include information on
how to use the machine correctly, its
functions and its maintenance.
• If these instructions are followed closely
no risks should be run in using the
appliance and all necessary safety
requirements regarding function and
maintenance should be upheld.
If more information is required or if a
particular problem not dealt with or
insufficiently explained in these
instructions should arise, the customer
should contact his/her local dealer or
the manufacturer directly.
• We would also like to bring to the
E
E