Philips 741453007 - Manual (Page 34)

34
Descaling - Programming
r i n s i n g
f i n i s h e d
is displayed. Close
the knob (6).
• At the end of the descaling operation,
exit the program by pressing the
“MENU/OK” key.
The message w a r m i n g u p will
appear.
Note: the duration of the
descaling and rinse cycle is about
40 minutes.
Important: regular descaling
of the machine protects it
from damage that may be costly to
repair.
The warranty does not cover any faults
caused by failure to descale the
machine, improper use or non-
compliance with the operating
instructions.
10 PROGRAMMING
10.1 MENU/OK key
To switch over to the programming mode,
press the “MENU/OK” key when the
machine is ready for use. To select the
function desired, press ∧∧∧∧∧ to go up or ∨∨∨∨∨ to
go down one item in the display.
To exit programming, press “ESC”
10.2 Selecting individual functions
Select the function desired with the ∧∧∧∧∧ or ∨∨∨∨∨
key. Activate the function desired with the
“MENU/OK” key; use the ∧∧∧∧∧ or ∨∨∨∨∨ key to
go through the variables that may be
selected; press “MENU/OK”to memorize
the variable selected.
Note: by pressing “ESC“ you may
interrupt programming at any
time without memorizing the changes;
to memorize changes you must first
press the “MENU/OK”key.
10.3 Description of programmable
functions
ENERGY SAVING
When the machine is used infrequently, it
may be switched over into the standby
position. This function allows you to save
on energy costs. However, we recommend
turning off the machine completely by
pressing the main switch (16) if it is to
remain out of use for a long time. When
the machine is turned back on, it only takes
two minutes to heat up.
• Press the “MENU/OK” key. Select the
E N E R G Y S A V I N G function with the ∧∧∧∧∧ or
∨∨∨∨∨ key and activate it with the “MENU/
OK” key; the word E N E R G Y S A V I N G will
be displayed. To disable the
E N E R G Y S A V I N G function, press the
“MENU/OK” key.
RINSING
Immediately after being turned on, the
machine automatically eliminates the
residual water left in the circuit so as to ensure
that the coffee will be made with fresh water
only. The
r i n s i n g
o n
function is
already programmed by the manufacturer.
• To disable this function, press the
“MENU/OK” key. Use the ∧∧∧∧∧ or ∨∨∨∨∨ key to
select the r i n s i n g function and
activate it with the “MENU/OK” key. The
words
r i n s i n g
o f f
or
E
E
E