Philips VRKD11YL99 - Manual (Page 30)

30 Timer Recording (cont’d)
4
Select the information you want to change using the
F.FWD button. Press the REW(ind) button to go back
one step. (There is an exception. Do not press the REW(ind)
button while the program number is flashing. If you do, you will
cancel the timer recording completely.)
5
While the information is flashing, enter the correct infor-
mation by pressing the PLAY button or the STOP button.
6
When all the information is correct, press the
EXIT/C.RESET button. Turn off the VCR before the
timer recording.
Correcting a Timer Recording
If you need to correct a timer recording after you have finished
setting the program, follow these steps. Make sure the VCR is on
and is in VCR position. (The VCR/TV light will appear. If it does
not, press the VCR/TV button once.)
2
Press the PLAY button or the STOP button to select the
timer recording you want to correct.
POWER
CHANNEL
PAUSE
PLAY
STOP
F. FWD
REW
RECORD VCR/TV
SPEED MENU DISPLAY
EXIT/ C. RESET COUNTER MEMORY
1
6
3
2
&
5
1
Press the MENU button so that the details of your pro-
grams appear on the screen. If there are no recordings set,
the main menu will appear.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 FRI
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
3
Press the F.FWD button.
4
TIMER PROGRAMMING
DATE STA/END CH
B 1 05/04 07:30 PM 16
FRI 08:30 PM SP
3 05/11 10:00 PM 125
W FRI 10:54 PM SLP
5 05/21 11:00 PM 40
DAILY 11:30 PM SLP