Philips VRKD11YL99 - Manual (Page 26)

POWER
CHANNEL
PAUSE
PLAY
STOP
F. FWD
REW
RECORD VCR/TV
SPEED MENU DISPLAY
EXIT/ C. RESET COUNTER MEMORY
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
26 Timer Recording
Follow the steps below to make your VCR record TV programs while
you’re away from home. You can have up to seven timer recordings.
For each one, the VCR will turn itself on, record, and turn itself off
automatically. Before you begin make sure:
● Channels are set up. Details are on page 12.
● The VCR clock is set. Details are on pages 14-15.
● There is a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s).
Details are on page five.
● The VCR is in VCR position. The VCR/TV light will appear. If it does
not, press the VCR/TV button once. Details are on pages 19-20.
1
First, press the MENU button until the main menu appears.
TIMER PROGRAMMING will be selected. Press the F.FWD
button. Program numbers that do not have a timer recording
stored will flash.
2
Press the PLAY button or the STOP button repeatedly to
select a program number. Then, press the F.FWD button.
(If you select a program number that already has a timer recording
stored, information about that program will appear. Press the PLAY
button or the STOP button to select another program number.)
3
Press the PLAY button or the STOP button repeatedly to
select a ONCE, DAILY, or WEEKLY recording. When the
arrow is beside your choice, press the F.FWD button.
● ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY - The VCR will record a TV program at the same time on
the same channel every day, Monday through Friday.
● WEEKLY - The VCR will record a TV program at the same time
on the same channel every week, for example, every Monday.
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
TIMER PROGRAMMING
PROG. 1234567
DATE
START TIME
END TIME
CHANNEL
REC SPEED
2-3
1
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT
[OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
• The TIMER PROGRAMMING menu
will not appear at step 1 if the VCR
clock is not set. Follow the steps on
pages 14-15 to set the VCR clock.
• Enter the information while the
space is flashing.
Helpful Hints