Philips HD8745-47 - Manual (Page 42)

40
ENGLISH
Problem Possible Cause Solution
The coffee is too weak (see
note).
This may sometimes occur when
the machine is automatically
adjusting the dose.
Brew a few espressos as described in
the section “Saeco Adapting System”.
The ceramic coffee grinder is set
to a coarse grind.
Adjust the ceramic coffee grinder to
a finer setting (see section “Adjust-
ing the Ceramic Coffee Grinder”)
Coffee is brewed slowly (see
note).
The coffee grind is too fine. Change coffee blend or adjust the
grind as explained in section “Adjust-
ing the Ceramic Coffee Grinder”.
The water circuit is not primed. Fill the water tank with fresh water
and dispense hot water.
The brew group is dirty. Clean the brew group (section
“Weekly Cleaning of the Brew
Group”).
The drip tray gets filled al-
though no water is drained.
Sometimes water is drained auto-
matically by the machine into the
drip tray to manage the rinsing of
the circuits and ensure optimum
machine performance.
This is seen as normal machine
behaviour.
Note:
These problems can be considered normal if the coffee blend has been changed or if the machine has just been
installed. In this case wait until the machine performs a self-adjusting operation as described in section “Saeco
Adapting System”.