Philips HD8745-47 - Manual (Page 14)

12
ENGLISH
11 Insert the plug of the other end of the power cord into a wall socket
with suitable power voltage.
12 Make sure the control dial is on the “ ” position.
13 Press the ON/OFF button to turn the machine on; the “ “ light will
begin to fl ash quickly indicating that the circuit has to be primed.
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the fi rst time, the following activities need to
happen:
1) You need to prime the circuit.
2) The machine will perform an automatic rinse/self-cleaning cycle.
3) You need to initiate a manual rinse cycle.
Circuit priming
During this process fresh water fl ows through the internal circuit of the
machine and the machine warms up. This takes a few seconds.
1 Place a container (1L) under the hot water/steam wand or Pannarello
(if supplied).