Philips HD8745-47 - Manual (Page 18)

16
ENGLISH
4 Put the “INTENZA+” water fi lter into the empty water tank. Press it
down until it cannot move any further.
5 Fill the water tank with fresh water and reinsert it into the machine.
6 Dispense all the water of the tank by using the hot water function (see
chapter “Hot water dispensing.
7 Remove the water tank, fi ll it with fresh water up to the MAX level. Put
it back into machine.
2 Remove the “INTENZA+” water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3 Set the “INTENZA+” water fi lter according to the hardness of the water
used:
A = Soft water
B = Hard water (standard)
C = Very hard water
Steady on
8 When the above steps have been completed, the “ “ light is shining
steadily.
Note:
We recommend you to replace the Intenza + fi lter every 2 months.