Philips HD8745-47 - Manual (Page 15)

ENGLISH
13
2 Turn the control dial to the “ ” position and wait few seconds.
3 When water steadily comes out and the “ “ light fl ashes slowly, turn the
control dial back to the “ ” position. The machine is in warm-up mode
(light “ “ fl ashes slowly).
Automatic rinse/self-cleaning cycle
When warm-up is complete, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1 Place the container under the dispensing spout to catch the small
amount of water which will be dispensed.
2 The indicator lights fl ash counter clock wise.
3 Wait for the cycle to fi nish automatically.
Note:
You can stop dispensing, by pressing either “ “ or “ “ button.
4 Wait for the water dispensing to stop. The “ “ light is now shining stea-
dily.
Flashing