Bunn W/SMART FUNNEL S/N SNG0033000 & UP User Manual

Page 18

Page 18

UNITS

METRIC DONE ENG

CHANGING UNITS

WILL!! ERASE!!

ALL PREVIOUSLY

STORED RECIPES

AND ALL SETUP

INFO WIL BE LOST!

ARE YOU SURE?

YES

SELECTS METRIC

AS THE

UNIT OF MEASURE

REPLACE

EXIT

SELECTS ENGLISH

AS THE

UNIT OF MEASURE

UNITS (SETTING UNITS OF MEASURE)

This function allows the units of measure to be

set in English or Metric readings for all screens. The

program is defaulted to English.

WARNING: Changing the unit of measure will erase

all coffee recipes stored in memory. All preinfu-

sion, pulse times, etc will also be erased. If using

this option after information has been stored, it is

important to have this information stored elsewhere

so that the machine can be reprogrammed.

Procedure for modifying units of measure:

1. Press and hold upper right hidden switch until the

display reads UNITS. Release switch. Press and

release METRIC or ENG to make a selection.

P3260

2. Press DONE to proceed. The display should now

read CHANGING UNITS!! WILL ERASE!! ... ALL

PREVIOUSLY STORED RECIPES AND ALL SETUP

INFO WILL BE LOST ... ARE YOU SURE?.

3. Press YES to begin the change. While the change

is in process, the display will read RESTORING

DEFAULTS and a count down will begin.

4. When the count down reaches 0 the display will

read SET NEW RECIPE?. The units have been

reset.

5. Press and release either of the ON/OFF switches

located on the front switch panel to exit the UNITS

function and return to the MAIN SCREEN.

PROGRAMMING THE BREWER (cont.)

35879.1 071405