Bunn W/SMART FUNNEL S/N SNG0033000 & UP User Manual

Page 14

Page 14

PROGRAMMING THE BREWER (cont.)
PROGRAM FUNCTIONS - LEVEL 2

There are three methods of programming the

various brewing parameters of the Single TF DBC with

Smart Funnel Brewer.

METHOD 1:

Using a Smart Funnel and a G9-2T DBC or MHG

Grinder:

Certain coffee NAMES are stored in the G9-2T DBC

or MHG's memory. When a particular name of coffee is

ground into the Smart Funnel, that name and the batch

size selected are transferred from the grinder to the

programming chip located in the funnel's handle. The

funnel is then inserted into the brewer's funnel rails.

The sensor coil on the brewer reads the information

contained in the handle. This then allows the operator

to set the BREW VOLUMES, BYPASS PERCENTAGES,

PULSE BREW TIMES, PREINFUSION TIMES and

DRIP-OUT TIMES for that particular coffee NAME.

Each coffee NAME can be set individually to provide

optimum brewing quality.

METHOD 2:

Using a RECIPE CARD to enter all of the brew set-

tings at one time:

If using a coffee name not in the grinder's memory,

the customer can obtain a RECIPE CARD from the

factory with all the information needed to set up that

particular coffee flavor. This includes the COFFEE

NAME, BREW VOLUMES, BYPASS PERCENTAGES,

PULSE BREW TIMES, PREINFUSION TIMES, and

DRIP-OUT TIMES.

METHOD 3:

Not using a Smart Funnel and/or a G9-2T DBC or

MHG Grinder:

This allows the operator to enter ONE set of brewing

parameters for each side, in the event a Smart Funnel

and/or a G9-2T DBC or MHG is not used with the brewer.

This is referred to as a NO NAME coffee flavor. If the

brewer does not read the information in the funnel's

handle, it automatically selects the NO NAME brewing

parameters set up prior to brewing. This includes the

BREW VOLUMES, BYPASS PERCENTAGES, PULSE

BREW TIMES, PREINFUSION TIMES and DRIP-OUT

TIMES for the three batch sizes.

RECIPES

This diagram allows for the creating, modifying,

or viewing of recipes in the brewer.

P2438

ARE YOU CREATING OR CHANGING A RECIPE FOR A

COFFEE NAME PREVIOUSLY USED IN THIS BREWER?

REFER TO NAME LIST

IN GRINDER MANUAL

CONTACT BUNN-O-MATIC

FOR ASSISTANCE

GO TO REVIEW RECIPES

AND FOLLOW INSTRUCTIONS

TO VIEW A LIST OF EXISTING RECIPES,

GO TO REVIEW RECIPES

AND FOLLOW THE INSTRUCTIONS

GO TO SET NEW RECIPE

AND FOLLOW THE

INSTRUCTIONS

YOU WILL ENTER

THE NO NAME

BREW SETTINGS

YOU WILL MODIFY AN

EXISTING RECIPE

DOES THE GRINDER HAVE THE

NAME IN ITS MEMORY?

FOLLOW INSTRUCTIONS

ON THE RECIPE CARD

HAVE YOU RECEIVED A RECIPE CARD

CONTAINING THE NEW RECIPE?

DON'T KNOW

YES

DON'T

KNOW

35879.1 071405