Philips DVDR3355-37B - Manual (Page 31)

31
English
Recording
(continued)
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalize the DVD+Rbefore it can be played on other players, see page 36.
{ Source }
– Use 3 4 keys to select the recording
input source.
{ Rec Mode }
– Use 3 4 keys to select your option.
See pages 27~28 on “Recording settings -
Recording mode”.)
{ Mode }
– Use 3 4 keys to select { Once },
{ Daily, } { Weekly, } { Mon-Fri }
(Monday to Friday, ) { Mon-Sat }
(Monday to Saturday) or { Weekend }
(Saturday and Sunday) recordings.
{ Date }
– Use 3 4 keys or the numeric
keypad 0-9 to enter the date for
recording.
{ Start }
– Use 3 4 keys or the numeric
keypad 0-9 to enter the start time of
recording.
{ End }
– Use 3 4 keys or the numeric
keypad 0-9 to enter the end time of
recording.
6
Select
OK
in the menu and press
OK.
➜
The system will store the timer entry
and return to the timer schedule list.
●
To cancel the above timer setting, select
CANCEL
in the menu and press OK.
7
Press TIMER to exit the menu.
8
Insert a DVD+R/+RW into the DVD
recorder.
9
Press STANDBY-ON to turn off the
DVD recorder.
➜
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
➜
If you ignore the warning message, the
DVD recorder will start the timer
recording automatically at the designated
time.
➜
The '
TIMER
’ icon will light up on the
display panel if a timer recording is set.
Helpful Hint:
– Set the timer recording one minute ahead
of the program’s start time. This helps
ensure the entire program is recorded as the
disc requires about 30 seconds to prepare
for recording.
Setting a timer recording from an
external Cable Box/Satellite
Receiver
If you have a Satellite Receiver/Cable Box
connected to this DVD recorder via the
S-VIDEO (Y/C) or VIDEO (CVBS) (see
page 16,) follow the steps described
below to program the recordings.
1
Select the channel you want to record at
the Satellite Receiver/Cable Box.
2
Program the recording with the required
information. Follow the steps
1
~
9
of
“Timer Recording (manually)” on pages
30~31.
{ Source }
– Use 3 4 keys to select { Rear S-Video }
or { Rear CVBS } as the input channel
and press OK to confirm.
3
Leave the Satellite Receiver/Cable Box on
for the recording.
001_033_dvdr3355_37A_eng5 21/3/05, 3:18 PM 31