Philips DVDR3355-37B - Manual (Page 24)

24
English
Getting Started
(continued)
Step 3: TV channel
programming
Before the DVD recorder can start
recording the TV channel programs, you
need to search for the available TV
channels and store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/Cable Box (if any) and switched
them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
SYSTEM
MENU
OK
Automatic TV channel search
This will automatically scan all the
receivable TV channels and the cable
programs from the Cable Box/Satellite
Receiver and store these channels on the
DVD recorder.
1
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on the TV.
2
Use 3 4 keys to highlight
{ System Menu - Channel Setup }
and press 2.
System Menu - Channel Setup
Modify Channel Information
Channel Search
Tuner Input Source
Search
Edit
Cable
3
Use 3 4 keys to highlight { Tuner Input
Source } and press OK.
{ Cable }
Select this if the DVD recorder is connected
via a cable box/satellite receiver.
{ Air }
Select this if the DVD recorder is connected
directly to the antenna wall outlet
4
Press OK to confirm.
5
Use 3 4 keys to highlight { Channel
Search } and press OK.
➜
The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total
number of channels found appears on the
TV.
TIPS: Press 1 to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
001_033_dvdr3355_37A_eng5 21/3/05, 3:17 PM 24