Black Box 2010 - Manual (Page 35)

33
W
ALL MOUNTING
6 Press the power cord into its guide groove
before you hook the unit on the screws.
7 Hook the holes on the back of the charger
over the screws heads in the wall.
1 Using a pencil, mark two holes on the wall
48mm apart in the position you want to
mount your charger.
2 Drill two holes with a drill bit suitable for the
screws and wall-plugs supplied (if required).
3 Drive the screws into the wall, leaving about
9mm free on which to hang the charger.
4 Remove the back panel of your handset
charger as shown.
5 If you wish, you can rotate the back panel
round and attach it to the bottom of the
charger.
To wall-mount the handset charger
Power cable