Black Box 2010 - Manual (Page 16)

Press buttons in order shown
For an explanation of Call Waiting
service, please see page 22.
When you hear the Call Waiting beeps
during a call:
Press the OPTIONS button until the
display shows CALL WAITING.
SWITCH Press SWITCH to speak to the other
caller. Your first call will be put ‘on hold’.
SWITCH Press SWITCH to toggle between the
2 callers.
When you wish to end one of the calls,
press the
TALK button. Your current call
will end.
Your handset will ring, display showing
CALL
. Press the TALK button and you
will be re-connected to the remaining
caller. Press the
TALK button again when
you wish to end the call.
NOTE: Ring back service must be
available – check with network provider.
If the number you are calling is
engaged, press the
OPTIONS button
until the display shows RING BACK.
OK Press OK . The display shows PLEASE
LISTEN and the voice says ‘Your Ring
Back request has been accepted’ .
Options
Options
To end the call, press the TALK button
or replace the handset in its charger.
When the engaged number becomes
free, your phone will ring and you will
be connected to the person you were
trying to contact. (They will answer
the call as if you had just called them.)
Press the OPTIONS button until the
display shows CHANNEL SEEK.
OK Press