Philips 40PFL8605H-12 - Manual (Page 75)

6.2 TV and remote control
The TV does not switch on
• Switch the TV off and on again with the switch on the bottom of
the TV.
• Check the power cable connection.
• Try using the keys on the TV to switch on.
The TV does not switch on from standby
• Check that the batteries of the remote control are not empty or
weak. Check their + / - orientation.
• Try using the keys on the TV to switch on.
The TV does not respond to the remote control
• Check that the batteries of the remote control are not empty or
weak. Check their + / - orientation.
• Clean the remote control and TV sensor lens.
• During start-up, which can take up to two minutes with connected
devices, the TV and some external devices do not immediately
respond to commands from the remote control. The device is
functioning normally and is not broken.
The TV switches off and the red light blinks
• Switch the TV off and on again with the switch at the bottom of
the TV. Check if there is enough space for ventilation. Wait until the
TV has cooled down.
If the TV does not restart from standby and the blinking occurs
again, call Consumer Care.
You forgot your code to unlock Child lock?
Read Help > More on … > Locks and timers > Child lock.
Troubleshooting / TV and remote control 75