Philips 40PFL8605H-12 - Manual (Page 33)

2.5 Ambilight
Benefits
With Ambilight, you enjoy a more relaxed viewing experience and
improved perceived picture quality.
Dim the lighting conditions in the room and position the TV up to
25cm away from the wall for the best Ambilight effect. To prevent
poor infrared remote control reception, position your devices out of
sight of Ambilight.
Adjust
You can use the Adjust menu to set the most used Ambilight
settings.
While watching TV, press s to open the Adjust menu.
To close the Adjust menu, press s again.
Switch Ambilight on or off
In the Adjust menu, select Ambilight and press OK. Switch Ambilight
On or Off.
Ambilight dynamic
In the Adjust menu, select Ambilight dynamic and press OK. Adjust
the speed at which Ambilight responds to onscreen images.
Ambilight brightness
In the Adjust menu, select Ambilight brightness and press OK.
Adjust the light output of Ambilight.
Ambilight colour
In the Adjust menu, select Ambilight colour and press OK. Select
Dynamic, if Ambilight should respond to onscreen images or select
one of the fixed colours. Select Custom if you want to set a specific
fixed colour.
Read more about Ambilight settings in Help > Use your TV > Use
Ambilight > Setup.
Setup
As well as the settings in the Adjust menu, Ambilight offers some
advanced settings. You can set a fixed colour of your own or a delayed
Ambilight switch off after you switched off the TV.
To open the Ambilight menu, press h and select Setup > TV
settings > Ambilight.
Custom colour
To set a Ambilight colour of your own, select Custom in the
Ambilight Colour menu. With Custom selected, you can open the
Custom colour menu. Select Palette to choose your own colour.
Ambilight Custom colour is a fixed (non-dynamic) colour setting.
Separation
To set the difference in colour level between the lights on each side
of the TV, select Separation. Separation Off gives a dynamic but
uniform Ambilight colour.
TV switch off
To set Ambilight to fade out and switch off a few seconds after you
have switched off the TV, select TV switch off. Allow Ambilight to
fade out and switch off completely before you switch the TV back
on again.
Scenea lounge light
To always switch off Ambilight when Scenea is switched on, select
Scenea lounge light and select Off.
Wall colour
The colour of the wall behind your TV can influence the colour
effect of Ambilight. To correct this influence, select Wall colour and
select a colour that matches the wall colour. Ambilight will correct its
colours to mix best with the colour of the wall behind the TV.
Lounge light mood
Read more about Lounge light mood in Help > Use your TV > Use
Ambilight > Lounge light mood.
Lounge light mood
When the TV is on standby, you can switch Ambilight on and create a
Lounge light mood in your room.
To switch Ambilight on while the TV is on standby, press J on the
TV.
Use your TV / Ambilight 33