BT On-Air 2000 Classic - Manual (Page 9)

BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
8
Note
When planning to use a handset with more than
one base, we recommend that you:
• Number each handset (from 1-6).
• Register your handset(s) at base 2
(and 3 & 4 if used) using the same internal
number as at base 1.
When registered to more than one base, the base
unit will automatically allocate itself a number.
Press the UP or DOWN button until the
display shows BASE.
Press the OK button.
Press the DOWN button until the display
shows PARAM.
Press the OK button.
Press the 3 button twice.
Enter your base system code (0000 if not
changed).
All registered handset numbers are
displayed.
Enter the number of the handset you wish
to de-register.
Press the C button to exit.
To de-register your BT On-Air 2000
Classic handset from the base
▲
▼
C OK
C OK
▼
CODE
C OK
Note
The number you save becomes the handset’s name
(ie. ‘Handset 1’).
On the handset:-
Press the UP or DOWN button until the
display shows BASE.
Press the OK button.
The display will show REGIST.
Press the OK button.
The display will show AUTO.
Press the DOWN button until CUSTOM is
displayed.
The available bases will be displayed.
Use the UP or DOWN button to select the
base you want to register your handset to.
Press the OK button.
The display will show CODE?.
The display will show ____ ____ .
Enter your 4 digit base system code
(once only).
Press the OK button.
At the base:-
Press and hold the button on the base until
it starts to flash.
On the handset:-
The display will show 2, 3, 4, 5, 6.
Use the UP or DOWN button to select the
handset you wish to register.
Press the OK button.
The display will show REGIST.
To register your BT On-Air 2000 Classic
handset to a base (if you have changed
System code from 0000)
▲
▼
▲
▼
C OK
C OK
C OK
▼
C OK
CODE
▲
▼
C OK