Keypad beeps, Silent ring – BT On-Air 2000 Classic User Manual
Page 16
BT On-Air 2000 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051
15
Press the UP or DOWN button until the
display shows RING.
Press the OK button.
Press the DOWN button until the display
shows BEEPS.
Use the UP or DOWN button to select
either OFF or ON.
Press OK to confirm.
The display will show DONE.
Press the C button twice to exit.
Keypad beeps
▲
▼
C
OK
▼
▲
▼
C
OK
C
OK
Press the UP or DOWN button until the
display shows SET.
Press the OK button.
Press the DOWN button until the display
shows LANGUAGE.
Press the OK button.
Use the UP or DOWN button to select the
language you require (English, German,
Spanish
, Italian, Dutch, Portuguese
or French).
Press OK to confirm.
The display will show DONE.
Press the C button twice to exit.
To change the display language
If you switch automatic end call ON you can
end a call by simply placing the handset
back on the charger. This means you won’t
always have to press the RED PHONE
button to end a call.
Press the UP or DOWN button until the
display shows SET.
Press the OK button.
Press the DOWN button until the display
shows END CALL.
Press the OK button.
Use the UP or DOWN button to select
either OFF or ON.
Press OK to confirm.
The display will show DONE.
Press the C button twice to exit.
To switch automatic end call on or off
▲
▼
C
OK
▼
C
OK
▲
▼
C
OK
C
OK
▲
▼
C
OK
▼
C
OK
▲
▼
C
OK
C
OK
Press the UP or DOWN button until the
display shows RING.
Press the OK button.
Press the DOWN button until the display
shows SILENT.
Press the OK button.
Use the UP or DOWN button to select
either OFF or ON.
The display will show the
symbol to
indicate a silent ring.
Press OK to confirm.
The display will show DONE.
Press the C button twice to exit.
Silent ring
▲
▼
C
OK
▼
C
OK
▲
▼
C
OK
C
OK
Note
When silent ring is switched on the handset will
not ring or emit any keypad beeps.