Philips SGC2910-27 - Manual (Page 28)

28
9 . When the PC detects the SGC2910 Wireless PC Controller, the following message will appear and ask you
to disconnect the controller . Once you have disconnected the SGC2910, you should click the ‘OK’ button .
If the message reappears you should wait several seconds and then click the ‘OK’ button . Some PCs require
several seconds to detect the SGC2910 as disconnected . Screen will say “Please unplug Philips Wireless PC
Controller” .
10 . You can now click the ‘FINISH’ button at the following screen to complete the installation .
11 . Once installation is complete you can reconnect the SGC2910 to your PCs USB port .
Uninstall
Software uninstall for users of Windows Vista
Note: We recommend that you use un-install under an Administrator Account for the simplest process . There
are two procedures for uninstalling the the Wireless PC Controller driver software . Both procedures are listed
below . Both procedures will remove the SGC2910 software from your system .
Uninstall through or change a program panel.
1 . Click the start button in the Windows task bar and select Control Panel . Click on uninstall a program . If
viewed in Classic View mode, click on the Programs and Features icon .
2 . Click on Philips Wireless PC Controller to highlight it . Click on uninstall / change button and the following
window appears .
EN
Vista 32 Addendum