Philips SGC2910-27 - Manual (Page 26)

1 . The SGC2910 Wireless PC Controller should be connected to your PC before beginning software
installation under Windows Vista .
2 . Close down all programs that are currently running on your computer .
3 . Place the SGC2910 software CD into your CD-ROM drive . If you have auto play enabled, the auto play
window will be displayed shortly after inserting the CD into your drive . You may double click on ‘Setup for
Philips Wireless PC Controller .exe’ to begin the software installation .
If auto play is not enabled, click on the Start button, select Computer . Double click on the CD drive where
the SGC2910 CD is located . This will launch the installer . Follow the on screen instructions .
26
EN
Vista 32 Addendum