5 call screening on handset, 6 call screening on base – Philips Cordless phone answer machine CD4452B User Manual
Page 34
Answering machine
32
access PIN (default is 0000) to activate the
remote access feature.
6.6.5
Call screening on handset
If Call screening is set to ON, when there is an
incoming message, you can press
to start
call screening. If you decide to pick up the call,
press
. Once the call has been picked up, the
recording will stop automatically.
Press
to access the main menu
Press /
to
select
ANS. MACHINE
Press and /
to
select
SETTINGS
Press and /
to
select
SCREENING
Press to
select
ON or OFF
Press
to save the settings
Note
During call screening, user cannot stop the call
screening, only
and
/
on handset can
be used.
6.6.6
Call screening on base
When the answering machine picks up the call,
call screening on base will be turned on if the
volume level is not at 00.You can press
to turn the base volume level to 00 to turn off
the call screening on base.
6
5
4
3
2
1
Press and /
to
select
SETTINGS
Press and /
to
select
REMOTE
ACC.
Press and /
to
select
ACTIVATE or DEACTIVATE
Press
to save the settings
6.6.4.3 How to remotely access your
answering machine
Place a call from your external phone to
your CD445
When the answering machine answers the
call and starts playing the outgoing message,
press to
enter
#
Enter the 4-digit remote access PIN
Note
If the PIN is correct, recorded messages would
be played back automatically.
However, if the PIN is incorrect, an error tone
would be heard, you can retry to enter the
remote access PIN again.
If retry PIN is still incorrect, the answering
machine will drop the line immediately.
If there are messages, all the new messages will
be played immediately and then old messages
will be played after a long beep.
Press the following keys to carry out the
desired function
Keys
Description
1
Skip to the previous message
2
Play the message
3
Skip to the next message
6
Delete the playing message
7
Turn on the answering machine
8
Stop message playback
9
Turn off the answering machine
#
Enter the remote access code if the
answering machine is on and outgoing
message is playing
Note
If the answering machine is off, the phone will
enter into the remote access mode after
10 rings. User can then enter the 4-digit remote
4
3
2
1
6
5
4
3