5 how to manually select, 6 how to register an add, 5 how to manually select a base station – Philips Cordless phone answer machine CD4452B User Manual
Page 26: 6 how to register an additional handset
Use more of your phone
24
5.7.6
How to register an additional
handset
The procedures described below are the
procedures that you will find in your handset.
The procedures may vary according to the
handset you want to register. In this case, please
refer to the manufacturer of the additional
handset.
Additional handsets must be registered to a
base station before you can use them. Up to 5
handsets can be registered to one base station.
The Master PIN is required before you can
register or unregister handsets.
Press
on the handset to access the main
menu
Scroll /
to
select
ADVANCED SET
Press and /
to
select
REGISTRATION
Press
and
/
to select your
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
Press
and enter the 4-digit master PIN
when prompted (default master PIN is
0000)
Press
on the base station for more
than three seconds until you hear a beep
tone. Now the base station is ready to
register the new handset
Press
on the handset to validate the
PIN code
WAITING -- is displayed on the screen
•
A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect, WRONG PIN! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period, NO
BASE will be displayed with an error tone, and
the handset returns to idle mode.
8
7
6
5
4
3
2
1
5.7.4.1 How to activate baby call mode
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
BABY
CALL
Press to
select
BABY MODE
Press and /
to
select
ON
Press
to save the settings
•
The message BABYCALL ON will display
on the idle screen.
5.7.4.2 How to deactivate baby call mode
Press and hold
(when Baby Call mode
has been activated before).
Press /
to
select
OFF
Press
to save the settings
•
The message BABYCALL ON will
disappear on the idle screen.
5.7.4.3 How to change baby call number
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
BABY
CALL
Press and /
to
select
BABYCALL NR.
Press
to enter the number
Press
to save the settings
5.7.5
How to manually select a base
station
One CD445 handset can register up to four
different CD445 base stations.
Press
to access the main menu
Scroll /
to
select
ADVANCED SET
Press and /
to
select
BASE
SELECT
Press
and
/
to select your
desired base station
Press to
confirm
5
4
3
2
1
6
5
4
3
2
1
3
2
1
6
5
4
3
2
1