7 how to unregister a ha, 8 how to change the mast, 9 how to reset to defaul – Philips Cordless phone answer machine CD4452B User Manual
Page 27: 10 how to set the prefix, 7 how to unregister a handset, 8 how to change the master pin, 9 how to reset to default settings, 10 how to set the prefix number
Use more of your phone
25
5.7.9
How to reset to default settings
You can reset your phone to the default settings
(see Section 7). After a reset, all your personal
settings and call log entries will be deleted, but
your phonebook remains unchanged.
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
RESET
Press
to enter the 4-digit master PIN
when prompted (default master PIN is
0000)
Press confirm
Press to
reconfirm
•
A beep tone is emitted and the screen returns
to welcome screen.Your phone is reset to its
default settings.
•
Some of the countries may not have welcome
screen and your phone will return to idle screen
after reset.
5.7.10 How to set the prefix number
This feature allows you to set the phone to use
the cheapest operator prefix. Once the prefix
number is set, it is automatically inserted at the
beginning of each number dialled out.
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
AUTO
PREFIX
Press
to enter the detect digits
•
The last stored detect digits are displayed.
Note
The maximum length of detect digits is 5 digits.
Press
to enter the auto prefix number
•
The last stored auto prefix number is displayed.
Note
The maximum length of auto prefix number is
10 digits.
Press
to save the settings
6
5
4
3
2
1
6
5
4
3
2
1
5.7.7
How to unregister a handset
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
UNREGISTER
Press
to enter the 4-digit master PIN
when prompted (default master PIN is
0000)
Press
and
/
to select your
desired handset
Press to
confirm
•
A beep tone is emitted from the handset to
indicate the handset unregistration is successful
and the screen shows UNREGISTERED
and back to idle screen.
Note
If there are no key presses within 15 seconds,
the unregistration procedure will be aborted
and the handset will return to idle mode.
5.7.8
How to change the master PIN
The Master PIN is used for setting call barring,
resetting your handset and for registration/
deregistration of handsets.The default PIN is
0000.The length of the PIN is four digits.This
PIN is also used to protect the settings of your
handset.Your handset will prompt you whenever
the PIN is required.
Press
to access the main menu
Press /
to
select
ADVANCED SET
Press and /
to
select
CHANGE
PIN
Press
to enter the 4-digit master PIN
when prompted
Press
to enter the new 4-digit PIN
Press
to enter the new 4-digit PIN again
for reconfirmation
Press
to save the settings
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN code.
7
6
5
4
3
2
1
6
5
4
3
2
1