Philips CDV19BPH99 - Manual (Page 40)

40 Audio Language/Sound Mode
• If a desired language is not shown
after pressing the o or p button
several times, the DVD does not
have that language.
• The display will disappear after
about 15 seconds.
• Some DVDs only allow you to
change the language in the Disc
menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode
of audio CDs cannot be changed.
Helpful Hints
The TV/DVD allows you to select a Language for DVDs or a
Sound Mode for Audio CDs.
1
Press the DVD button.
2
Press the AUDIO button during playback, then press the o
or p button to select the desired language. The language can
be changed only if multiple languages are available on the DVD.
1
Press the DVD button.
2
Press the AUDIO button during playback, then press the o
or p button until the sound mode you want appears.
● When producers record an Audio CD, they record the sound on
two channels - the left and the right. You can choose to hear the
sound on the left channel, the sound on the right channel, or the
sound on both channels (Stereo). You will select L-CH, R-CH, or
STEREO.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO BONJOUR
AUDIO 1 AUDIO 2
Only the right channel is active.
AUDIO R - C H
Only the left channel is active.
AUDIO L - C H
Both right and left channels
are active (stereo).
AUDIO S T E R E O
MUTE
SLEEP DISPLAY
TV DVD
PLAY
REV FWD
STOP
SLOW SKIP PAUSE
CH.
VOL.
1 2 3
4 5 6
7 8 9
0 +100
CLEAR +10
SEARCH MODE REPEAT A-B
MENU TITLE
ENTER RETURN
SET UP MODE AUDIO SUB TITLE ANGLE
N0286UD
POWER
SELECT
DVD
AUDIO CD
2
Language
Sound Mode
Press the o or p button.
Press the o or p button again.
Press the o or p button again.
1