Philips CDR570BK - Manual (Page 22)

English
23
1 Press repeat on the remote control one or more times
during CD play.
➜ When
REPEAT TRACK lights up, the current track will play
repeatedly. When REPEAT ALL lights up, the entire disc or
program plays repeatedly.
2 To return to normal play, press REPEAT on the remote
control one or more times until:
➜ The
REPEAT text disappears from the display.
Note:
- You can use shuffle in combination with
REPEAT ALL or
programmed play.
- REPEAT is also cleared when you open the disc tray.
• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track ( STEP ).
Programming
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
➜
PROGRAM flashes and PROGRAM will appear on the
display.
2 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Enter a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks ( STEPS ) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROG(ram) on the remote control to end
programming.
➜
PROGRAM lights continuously.
5 Press PLAY/PAUSE 2 ; to start programmed play.
Note:
- To review the program, press PROG(ram) on the remote
control, followed by 5 or 6 with the CD recorder in Stop
mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks,
PROG FULL will
appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜
PROGRAM will disappear from the display.
• The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time on the program will be displayed.
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
2 7 8 11
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
1 2 3 4 5 6 7 8 9 10 11
Remarks about programming
DIGITAL
OPTICAL
ANALOG
I
I
CD
SYNC PROGRAM
SHUFFLE REPEAT
SCAN
ALL
MANUAL
TRACK RW
REM TRACK REC TIME REM TOTAL TIME STEP TRACK FADE
1 2 3 4 5 6 7 8
Repeat CD, track or program
PLAYING PROGRAMMING