Philips SGC2909-27 - Manual (Page 39)

EN
39
EN
1 . In Windows XP and 2000, right click on the “My Computer” icon on your desktop and then click on “Prop-
erties”. You should now see the “System Properties” window. Click on the “Hardware” tab and then click
on the “Device Manager” button. In Windows ME and 98SE, right click on the “My Computer” icon on your
desktop and then click on “Properties”. You should now see the “System Properties” window. Click on the
“Device Manager” tab.
2. You should now see the device manager. Verify that the device manager has the following devices listed. (Note:
Attached is a screenshot of the entries that should be listed within your respective Windows operating system.)
a. In WinXP and Win2000, two new entries called “Philips Controller” and HID-compliant game control-
ler” will be listed under the Human Interface Device category. In WinME, one new entry called “Philips
Joypad Mouse” will be listed under the Human Interface Devices category. In Win98SE, one new entry
called “Philips Joypad Mouse” will be listed under the Human Input Devices (HID) category.
b. In all Windows operating systems, a new entry should be listed under the Keyboards category. The new
entry should be “HID Keyboard Device”.
c. In all Windows operating systems, a new entry should be listed under the Keyboard category. The new
entry should be “HID-Compliant Mouse”
3 . If all these entries are listed then the SGC2909 has been properly installed . If not then you will need to uninstall
the SGC2909 software by following the Uninstall instructions listed within the SGC2909 Instruction Manual .
Then reinstall the software and re-check the device manager to ensure the SGC2909 was properly installed.
4. If the reinstall doesn’t work you should check and verify that the device manager doesn’t have any “Un-
known Device” listed. Check the “Human Interface Device” and “Universal Serial Bus controllers”. If you
see any “Unknown Device” you should uninstall it. You should right-click on the “Unknown Device” to
highlight and click on “Uninstall” or “Remove”. The entry should now be removed from the device manager.
You should now try reinstalling the software according to the instructions for your operating system.
------------------------------------------------------------------------------------------------------------
Question
I want to use my SGC2909 in First Person Shooters games . I want my SGC2909 to perform similarly to my
Playstation2 controller. How can I configure the SGC2909 to do this?
Answer
Most First Person Shooter games (FPS) are designed to only support the mouse and keyboard. Most developers con-
sider the mouse and keyboard to provide the best control, so controller support is usually very basic or not included.
Currently, our Profile Editor will not allow you to setup the SGC2909 so it emulates the Playstation2 control
setup in FPS game. Currently, only mouse movement can be assigned to the SGC2909 analog sticks. You can con-
figure the D-pad to the WASD keys and the right analog stick to mouse movement. This will allow you to use the
SGC2909 d-pad to control character movement and the right analog stick to control the camera movement.
------------------------------------------------------------------------------------------------------------
Question
Can I assign a keyboard key to analog sticks of the SGC2909?
Answer
No you cannot .
You can only assign mouse movement to the analog sticks.
FAQs