Philips 741424043 - Manual (Page 36)

36
13.2.3 Cleaning the pannarello.
After using the pannarello, you should
clean it thoroughly to ensure maximum
hygiene and functionality over time. The
cleaning steps are as follows:
• Loosen the ring nut (39) of the pannarello.
• Remove the pannarello from the steam tube.
• Take off the outer casing (40) of the
pannarello.
• Clean all parts of the pannarello
thoroughly with running drinking water.
• Reassemble the pannarello.
• Insert the pannarello back into the steam
tube.
• Tighten the ring nut (39).
• Remove the outer sleeve (item 40) so that
you can hold the inner sleeve still when
tightening the nut.
Note: if the ring nut is not
securely tightened, the
pannarello may slip out during use.
13.3 Cappuccinatore
The cappuccinatore is a device
that automatically froths milk,
making it extremely easy to prepare
classic Italian-style cappuccino.
To install the cappuccinatore maker,
proceed as follows:
• Make sure that no other devices are fitted
on the steam tube; you must remove any
devices that have been installed.
I.E. the “Pannarello”.
• Loosen the ring nut (39) without slipping
it off the cappuccinatore.
• Insert the cappuccinatore in the steam
tube to a depth of about 3 cm.
• Tighten the ring nut securely.
Note: if the ring nut is not
securely tightened, the
cappuccinatore may slip out during use.
13.3.1 Hot water with the
cappuccinatore
To dispense hot water using the
cappuccinatore, follow the
40
39
i
39
i
Optional Accessories