Philips CDR785BK - Manual (Page 26)

1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect the
microphone.
3 Connect a microphone to MIC.
4 Press CD 1, CD 2 or CD 3 to select the disc you wish to mix
the microphone with.
5 Press REC TYPE on the set to enter into the recording menu.
6 Rotate ¡ JOG CONTROL ™ to select the manual record
mode for the microphone:
➜
CD MIX MIC is displayed.
7 Press YES to confirm.
➜ WAIT is displayed.
➜ RECORD ? is displayed.
8 Press YES to confirm.
➜ Recording is started
10 Press PLAY/PAUSE
; 2 to start playback.
11 Rotate ¡ JOG CONTROL ™ to select the desired track.
➜ The selected source is mixed to the microphone.
12 Press STOP 9 to stop recording.
• To perform microphone recording only see “Manual
recording” of the chapter “External recording”.
Note: The set is standard adjusted for a mono microphone. If
you wish to use a stereo microphone, press AUX for
more than 5 seconds. The set will display
MONO ?.
Press NO to select STEREO or YES to select MONO.
STEREO MIC or MONO MIC will be displayed.
TEXT TOTAL TRACK TIME TOTAL REM STEP
DIGITAL CDRW CDR W
RECORD IN PROGRESS
REC TRACK TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
OPTICAL
ANALOG
FINALIZE ALC
COMPILE CD TRACK PROG
SHUFFLE REPEAT ALL EDIT
MIC
PHONES
R W
CDR
AUX
CD CD
COMPILE CD
RECORD
JOG CONTROL
NO
YES
REC TYPE
ERASE FINALIZE
REC LEVEL BALANCE TEXT
PROG TRACK EDIT
CD TEXT EDITING
R
W
Microphone recording
INTERNAL RECORDING
26
English