Philips FWC85C37 - Manual (Page 15)

3139 116 19591 (ENG)
15 OPERATING THE SYSTEM
• Repeat step 3 - 4 to select the
desired mid and high frequencies
Spectrum Analyzer band levels.
5 You can choose to edit the name for
the personal setting.
™ The first character of setting name
will be flashing.
6 Adjust the JOG to select the desired
alphabet, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will
be flashing.
• Repeat step 6 - 7 to store up to 10
characters.
8 To store the setting, press
PERSONAL again.
• Before storing the setting, you
can press à to retrace the steps
in the reverse order.
• To exit without storing the
setting, press Ç.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– wOOx level cannot be stored as part
of the personal setting.
– It is not possible to adjust Bass/Treble
level during personal setting, " USE
JOG" will be displayed.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust
the system to select a type of
environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE" will be
displayed.
BASS/TREBLE
The BASS/TREBLE features enable you
to define the sound processor settings
for Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
™ The BASS and TREBLE LED will
be lit.
™ "ADAPT BASS AND TREBLE
LEVELS" will be displayed.
2 Use BASS/TREBLE CONTROL to
select the desired BASS or TREBLE
level respectively.
™ The BASS/TREBLE level will
increase or decrease between
level +3 and -3.
• Press BASS 3 or 4 to select the
low tone level.
™ "BASS -X or BASS +X" will be
displayed.
• Press TREBLE 3 or 4 to select the
high tone level.
™ "TREBLE -X or TREBLE +X"
will be displayed.
Note:
– "
X" denotes the sound level.
wOOx
There are three wOOx settings to
enhance the bass response.
1 Press wOOx PLUS (or wOOx on
the remote control) to select between
normal or enhanced wOOx effect.
• When normal wOOx sound effect is
selected;
™ The
W OO X display is switched
off.
™ "WOOX NORM" will be displayed.
• When enhanced wOOx sound
effect is selected;
™ The
W OO X appears on the
display.
2 Adjust wOOx LEVEL to select the
desired levels of wOOx.
™ The
W OO X display lights up.
™ "WOOX 1, WOOX 2 or WOOX 3"
will be displayed.
Notes:
– When Personal or Bass/Treble sound
control is selected, wOOx will be
switched off automatically.
– Some CDs or tapes might be recorded
in high modulation. It may cause
distortion at high volume. If this occurs,
switch off wOOx or reduce the volume.
Automatic DSC-wOOx /
VEC-wOOx selection
The best wOOx setting is generated
automatically for each DSC or VEC
selection. You can manually select the
wOOx setting that best suits your listening
environment.
pg 01-28/C85/37-Eng 2/16/00, 9:03 AM 15