Philips FWC85C37 - Manual (Page 14)

3139 116 19591 (ENG)
14
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX/CDR IN terminals.
Dim mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
DIM appears on the display.
™ "DIM 1", "DIM 2", "DIM 3" or
" DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
OPERATING THE SYSTEM
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with
Spectrum Analyzer On
DIM 3 - half brightness with
Spectrum Analyzer Off and all LEDs
on the system will be switched off.
Volume Control
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
1 Press MUTE on the remote control
to switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
Sound Control
For Optimal sound listening, you
can only select one of the following
sound control at a time :
PERSONAL, DSC, VEC or BASS/
TREBLE.
PERSONAL SOUND
You can store upto 6 personal settings.
1 Press to select the PERSONAL
feature.
2 Adjust the JOG to select the desired
Personal setting.
™ The selected personal setting
number will be encircled.
™ If no name has been stored
previously, " PERSONAL X" will be
displayed. " X" is the setting
number.
Personal Setting
You can adjust the personal setting to
your desired level with the JOG control.
1 Press and hold PERSONAL for
about five seconds to switch on the
personal setting mode.
™ "SELECT PRESET NUMBER" will
be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting
and press á to confirm the
selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for low
frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed and the next
followed by "
ADAPT HIGH FREQ
LEVEL".
pg 01-28/C85/37-Eng 2/16/00, 9:03 AM 14