Philips MP3-WMA-CD playback Micro Hi-Fi System - Manual (Page 18)

18
English
Clock/Timer
Setting the clock
1
In Standby mode, press PROG/CLOCK
button.
➜
The clock digits for the hours flash.
2
Press
¡1 / 2™ to set the hours.
3
Press PROG/CLOCK again.
➜
The clock digits for the minutes flash.
4
Press ¡1 / 2™ to set the minutes.
5
Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, -- --:-- -- will be
displayed.
Setting the timer
●
The system can be used as an alarm clock. CD
or TUNER or DOCK can be set to switch on at
a preset time. The clock time needs to be set
first before the timer can be used.
●
If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In standby or during playback, press TIMER on
the remote control for more than 2 seconds.
2
Press
¡1 / 2™ (or CD/TUNER/DOCK on
the remote control) to select sound source.
3
Press TIMER to confirm your desired source.
➜
The clock digits for the hours flash.
4
Press
¡1 / 2™ to set the hours.
5
Press TIMER again.
➜ The clock digits for the minutes flash.
6
Press
¡1 / 2™ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and actiated.
Notes:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- If source DOCK is selected and no iPod is docked
or no dock connection is made, TUNER will be
selected automatically.
To activate and deactivate timer
●
In standby or during playback, press
TIMER once.
➜ Display shows if activated, and disappears
if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote control repeatly to
select desired time before
system shuts off.
➜ Display shows SLEEP and
series of time options for
selection: , , , , , ...
● To deactivate, press SLEEP on the remote
control once or more until “ “ is shown, or
press STANDBY ON on the system or
remote control.
SLEEP TIMER
M I C R O S Y S T E M
iR
M C M 1 0 8 D B
PG 001-024_MCM108DB_37-Eng 26/4/07, 17:07 18