Philips MP3-WMA-CD playback Micro Hi-Fi System - Manual (Page 11)

English
11
Preparations
Rear connections
The type plate is located at the rear of the
system.
A Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
B Antennas Connection
AM (MW) antenna
1
Unfold the loop antenna and if necessary, use
screws (not supplied)to fix it to a flat, hard and
stable place:
2
Fit the plug of the loop antenna to AM
ANTENNA as shown above.
3
Adjust the antenna for optimal reception
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
1
2
FM antenna
AM antenna
Speaker
(right)
Speaker
(left)
AC powr cord
PG 001-024_MCM108DB_37-Eng 26/4/07, 17:07 11