Philips MP3-WMA-CD playback Micro Hi-Fi System - Manual (Page 14)

14
English
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
In Active standby, or Eco standby, press
STANDBY-ON (
y on the remote control).
➜
The system will switch to the last selected
source.
●
Press SOURCE (CD, TUNER or DOCK on
the remote control).
➜
The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY-ON ( y on the remote
control).
➜ The clock is displayed.
To switch the system to Eco-power
standby mode
●
Press and hold STANDBY-ON ( y on the
remote control) for more than 2 seconds.
➜
The clock is displayed.
Power-saving automatic standby
The power-saving feature automatically switches
to Eco power standby 15 minutes after a CD
playback has ended and no control is operated.
Note:
– In the Eco power standby, no button, except
SOURCE, and STANDBY-ON buttons, can
be activated.
SOURCE VOLUME - + BAND
O P EN / CLOSE
PROG/CLOCK TUNING STANDBY-ON
Adjusting volume and sound
1
Press VOLUME – / + to increase or decrease
volume.
➜ Display shows the volume level and a
number from 0-32.
2
Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3
Press DBB (on the remote control) to switch
bass enhancement on or off.
➜ Display shows: if the DBB is activated.
4
Press MUTE on the remote control to stop
sound play-back instantly.
➜
Playback will continue without sound and the
display shows MUTE .
●
To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
VOLUME
DBB DSC
DBB
PG 001-024_MCM108DB_37-Eng 26/4/07, 17:07 14