Philips 63PF9631D-37B - Manual (Page 57)

Select connected equipment
Record with your recorder
DIGITAL AUDIO OUT
o DISPLAY
SYNCHRONIZED o o AUDIO
OUT L R
DISPLAY SYNCHRONIZED
DIGITAL
AUDIO
OUT
Connect a Digital Surround receiver
55
English
User Man
ual
< Connect a MultiChannel Surround receiver to the DIGITAL
AUDIO OUT connector at the bottom of the TV.
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note:When recording analog programs, switching channel
numbers on your TV does not disturb recording !
Note: Due to legal requirements, it is possible that with
certain copy protected PCM audio qualities from a
peripheral equipment connected to the
HDMI input, the
Digital audio output signal is muted.
Before operating your connected equipment you have to make
a selection in the Installation, Connections menu, p. 36.
1. Press the AV button.
2. Press the cursor up/down to select AV1 , AV2 , AV3 ,
HDMI 1 , HDMI 2 , Side or TV, according to where you
connected your devices.
3. Press OK .
SELECT SELECT
PHILIPS DEVICE CONTROL
INPUT INPUT
GUIDE
MY CONTENT
FORMAT
POWER
FAV
MUTE
-
INFO PIP A/CH
SELECT SELECT
INPUT INPUT
Note: to record digital programs to an analog recorder, the TV needs to be switched on and tuned
to that digital programs.
2572.3 en 22-03-2007 13:16 Pagina 55