Philips 63PF9631D-37B - Manual (Page 38)

This allows you to identify the type of accessory device you
have connected to each particular input and output.
1. Select Connections.
2. Press the cursor right to enter the list of types of external
inputs.
3. Select the appropriate input with the cursor up/down.
> When you select AV1 , AV2 , AV3 , HDMI 1 , HDMI 2 ,
Side or DIGITAL AUDIO IN a list appears allowing
you to identify which type of accessory device is
attached to this input.
4. Press the cursor right again to enter the list of types of
devices connected to the selected input.
5. Select the accessory device with the cursor up/down.
Digital Audio In
If an accessory device has a digital audio output, you can
connect this with a single cable to the TV’s
DIGITAL
AUDIO IN jack.
In the Connections menu, assign the DIGITAL AUDIO IN
to the corresponding external input to which your
accessory device is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO OUT connector to an external amplifier
or receiver.
If your amplifier or receiver has a matching connector for
Digital Audio In, you can connect it with a single cable to
the TV’s
DIGITAL AUDIO OUT .
See To make Video and Audio connections, Digital Surround
receiver, p. 55.
Select your connections
36
Info
TV menu
Installation Connections
AV1
AV2
AV3
HDMI 1
HDMI 2
Side
DIGITAL AUDIO IN
Language
Channels
Preferences
Connections
Clock
Reset AV settings
Software upgrade
2572.3 en 22-03-2007 13:16 Pagina 36