Philips 32PF9996-37 - Manual (Page 15)

11
& Select Demo in the Main menu with the cursor down.
é Select Auto demo or one of the features with the cursor right
and press the OK button on the remote control.
If Auto demo has been selected the demo will automatically
present all the features sequentially in a loop. Press one of the
cursor buttons to stop the Auto demo.
If one of the features has been selected, this particular feature
demo will run one time only, until activated again, and the Demo
menu will reappear.
Digital processing, Light sensor and 3D Y/C Comb filter On
or Off
Select Digital processing, Light sensor and 3D Y/C Comb filter
On or Off to really see the difference in picture quality.
In Dealer Demo mode it is possible to change channels with - CH +
and to adjust the volume.
Note: the Dealer Demo is not part of the automatic sequence and can
only be activated separately.
Auto demo
...........
Dealer demo
- Digital processing
- Light sensor
- 3D Y/C Comb filter
TV
Settings
Demo
Install
Source
AV1
AV2
HDMI
Side
Center input
(Center in volume)
Settings
Demo
& Select Source with the cursor right.
é Press the cursor down to select one of the external AV inputs.
“ Press the cursor right to enter the list of types of devices
attached to the selected input.
‘ Select the accessory device with the cursor up/down.
Once you have named the source, e.g.VCR, this source will
automatically be selected when your remote control is in VCR
mode, see p. 5, and when you press the
AV+ button on the
remote control.
( Press the MENU button on the remote control to turn off all
menus on screen.
§ Keep the AV+ button on the remote control pressed and then
p ress this button repeatedly.
The Source Select menu appears in which you may select a
source or peripheral connected to be displayed on screen.
Center input - Center in volume
When you have connected a multichannel surround receiver to
the TV, the loudspeakers of the monitor can act as center
speaker, making a separate center speaker unnecessary.
Select
Center input On.
When having selected On you can adjust the Center in
volume with the cursor left/right to correct volume level
differences of the external audio receiver and speakers.
Source