Philips 42PF9631D-37E - Manual (Page 43)

EN
41
L Pr H
R Pb V
DIGITAL
AUDIO
IN Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
ANTENNA 75
o
CABLE
RECORDER
OUT IN
3
AV2 :
L + R + VIDEO
Connect a VCR or DVD recorder
1. Connect the RF Antenna or Cable TV cable (eventually via an optional two-way signal splitter
and/or Cable TV converter box) 1 to the RF IN socket of your recorder.
2. Connect another RF cable 2 from the output OUT of your recorder to the TV’s
CABLE/ANTENNA 75 Ω
x jack.
3. Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for
stereo devices) AV cables 3 to the VIDEO , AUDIO L and R input jacks of AV2 .
4. Select the equipment you have connected in the Setup menu, Select your source, p. 22 and link
them to the AV connectors you have connected your equipment to.
Warning: do not place your recorder too close to the screen as some recorders may be susceptible
for signals from the display. Keep a minimum distance of 0,5 m from the screen.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO input and connect the
audio cables to the AUDIO L and R input jacks of AV2.
When using the S-VIDEO connector do not connect any device to the AV2 VIDEO jack.
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.