Philips 42PF9631D-37E - Manual (Page 13)

EN
11
Should your remote be lost or broken you can
still change some of the basic settings with the
buttons on the right side of your TV.
Press the power switch B to switch the TV
on.
The MENU button can be used to summon
the Settings menu without the remote control.
Use:
- the
VOLUME + and - buttons and the
PROGRAM/CHANNEL + and - buttons to
select menu items;
- the MENU button to confirm your selection.
Note:When activated via the MENU button
on the right side of the TV, only Exit lets you
dismiss the menu.
Navigate to Exit and press the MENU button.
Buttons on the right of the TV
VOLUME PROGRAM/CHANNEL MENU POWER B
Notes:
- Once you completed the initial installation procedure you
can access the screens from the Settings menu. See p. 12.
- If the TV has already been installed before and/or you want
to change the First time installation settings, proceed with
How to navigate through the menus, p. 12.
First time installation
1. After an introduction screen, you are asked to select a
language of the TV’s on-screen-menus. (The text of the
header and the info on screen continuously change
language.)
2. Press the cursor up/down to highlight your language.
3. Press the
OK button.
4. Follow the on-screen instructions to proceed.
Turn the TV on
< Press the power switch B at the right side of the TV.
>
An indicator on the front of the TV lights up.
< Press the +CH- button or the POWER B button on the
remote control.
Note: the first time (and only the first time) you turn on your
TV, you see a Welcome screen followed by the installation
procedure. See First time installation below.